To register a handset to a cordless base:

1. Put the W70B into Registration Mode by long-pressing on the button (that looks like a WiFi symbol) on the base station until the registration LED flashes.

The cordless base will be plugged into your internet router or switch.

The cordless base is not where the phone charges / usually sits. That is the charging cradle.

​

2. Register the handset

On the handset (if it says "Unregistered")(see "De-register a handset from a base" below if the handset does not say "Unregistered")

a. Press the Reg soft key to register the handset

OR

b. You can also press OK > Register Handset and then select the desired base to register the handset. You need to enter the base PIN (default: 0000) after a base is found.

After the handset is registered successfully, the phone says “Handset Subscribed” and “Base NO. (The last 4 characters of the connected Base’s MAC address)”.

After the handset is initialized successfully, an icon with the internal handset number and handset name appears on the phone screen

De-register a handset from a base

If the handset does not say "Unregistered" and you would like to register it to only one base:

1. From the main screen, hit the circular “OK” button on the dial pad

2. Go to the “Settings” gear (white gear with blue box) and hit “OK” 

3. Go to “Registration” and hit “OK” 

4. Go to “De-reg Handset” and hit “OK” 

5. Enter the PIN (default: 0000)

6. Select handset, hit “OK” and then “Yes”